Grand Vitara 4WD V6-2.5L (2003)
3. Install timing chain guide No.4 (1).
4. Check that knock-pins of intake and exhaust camshafts are aligned with match marks on cylinder head as shown in figure.
5. Install by aligning match marks (2) on yellow plate (1) of LH bank 2nd timing chain and idler sprocket No.2.
6. Install sprockets to intake and exhaust camshafts by aligning silver plate of LH bank 2nd timing chain, match marks on intake sprocket and exhaust
sprocket respectively.
CAUTION: Do not turn camshaft more than necessary. If turned excessively, valve and piston may get damaged.
7. Install LH bank intake and exhaust camshaft timing sprockets. To install it, fit a spanner to hexagonal part at the center of camshaft to hold
stationary.
