Grand Vitara 4WD V6-2.7L (2008)
Alarm Module: Service and Repair
Immobilizer Control Module (ICM) Removal and Installation
Reference: Inspection of Immobilizer Control Module (ICM) and Its Circuit
REMOVAL
1. Disconnect negative (-) cable from battery.
2. Disable air bag system referring to Disabling Air Bag System: Advanced Air Bag or Disabling Air Bag System: Except Advanced Air Bag.
3. Remove driver air bag (inflator) module referring to Driver Air Bag (Inflator) Module Removal and Installation: Advanced Air Bag or Driver Air
Bag (Inflator) Module Removal and Installation: Except Advanced Air Bag.
4. Remove steering wheel referring to Steering Wheel Removal and Installation.
5. Remove steering column lower and upper covers.
6. Remove engine start knob (1) if equipped with keyless start system.
7. Disconnect connector (1) from ICM (2).
8. Remove a screw (3) from ICM.
9. Remove ICM from steering lock assembly or steering lock unit.
NOTE: The antenna part of ICM is fragile. Therefore, do not add strong power to the part or twist the part.