Grand Vitara JLS 2WD V6-2.5L (2001)
6. Install differential carrier assembly to axle housing and tighten carrier nuts to specified torque.
Tightening torque
Differential carrier nut (a): 55 Nm (5.5 kg-m, 40.0 ft. lbs.)
7. For vehicle with ABS, connect wheel speed sensor coupler and install harness clamps.
8. Install propeller shaft and torque nuts to specification.
Tightening torque
Propeller shaft nut (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
9. Remove floor jack from axle housing and connect breather hose onto axle housing and clamp it securely.
10. Connect brake pipes onto axle housing and clamp them securely. For clamping positions, refer to Brakes and Traction Control.
11. Connect brake flexible hose to bracket on axle housing and secure it with E-ring.
12. Install LSPV stay to axle housing, tighten LSPV stay bolt to specified torque. And adjust LSPV referring to Brakes and Traction Control.
Tightening torque
LSPV stay bolt (a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)