Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Brake Rotor/Disc: Service and Repair
With ABS
Front
REMOVAL
Remove front sensor rotor.
INSPECTION
^
Check rotor serration (teeth) for being missing, damaged or deformed.
^
Check sensor rotor for being deformed (warped).
^
Check that no foreign material is attached. If any faulty is found, repair or replace.
INSTALLATION
Install front sensor rotor.
Rear
REMOVAL
1. Remove rear axle shaft.
2. In order to remove sensor rotor from retainer ring, grind with a grinder one part of the sensor rotor as illustrated till it becomes thin.
CAUTION:
^
Cover vinyl sheet or the like over wheel bearing so that fine grains from grinding will not enter there.
^
Be careful not to go so far as to grind the retainer ring.
3. Break with a chisel the thin ground sensor rotor, and it can be removed.
INSTALLATION