Grand Vitara JLS Plus 2WD V6-2.5L (2000)
1. Check timing mark on crankshaft as shown in figure.
2. Install 1st timing chain crankshaft sprocket as shown in figure. Confirm that tooth for CKP sensor are free from metal particles and damage.
3. Check timing mark on RH bank intake camshaft as shown in figure.
4. Install RH bank 1st timing chain intake camshaft sprocket noting following points.
^
The sprocket should be set in such way that its RH mark can be seen.
^
Camshaft should be held stationary by using a spanner at its hexagonal parts as shown in figure.
Tightening Torque (a): 80 Nm (8.0 kg-m, 57.5 ft. lbs.)