Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Continuing to your left. Install the last Vacuum Hose Mounting Clamp (7) with the other existing bolt on the surge tank.
Remove and discard the vacuum plug and clamp at the right rear side of the intake near the MAP sensor. Connect the Vacuum Adaptor (6) to the
Vacuum Hose (4). Connect the Vacuum Hose (5) to the Adaptor (6) with a Hose Clamp (3). Connect finished hose assembly to the intake and
secure with remaining Hose Clamp (3). See picture.