Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Starter Motor: Service and Repair
Disassembly/Reassembly
DISASSEMBLY
NOTE:
-
Before disassembling starting motor, be sure to put match marks at two locations (A & B) as shown in the figure so that any possible mistake can
be avoided.
-
Do not clamp yoke in a vise or strike it with a hammer during repair operations.
1. Remove protector (if equipped) and magnetic switch.
NOTE: Don't disassemble this switch. If defective, replace as a complete assembly.
2. Remove bolts shown in the figure, then separate reduction gear assembly from starting motor assembly.