Grand Vitara JLS Plus 2WD V6-2.5L (2000)
11. Remove brush springs and brushes.
12. Remove rear bracket cap, and then remove rear bush, as required.
REASSEMBLY
CAUTION:
-
Washing, adjusting and disassembling of shock absorber (clutch plate) are not allowed.
-
New oilless bearing have been lubricated when they are supplied as spare parts. DO NOT wash with grease dissolving solvent nor lubricate them
with other lubricant.
1. Inspect component parts and replace with new ones as necessary.
2. Apply grease.
3. Install armature to yoke.
4. Install brushes and brush springs to brush holder.
5. Install brush holder to armature while pushing 4 brushes outward.