Grand Vitara JLS Plus 2WD V6-2.5L (2000)
Wheel Hub: Testing and Inspection
Rear
WHEEL DISC, NUT & BEARING CHECK
-
Inspect each wheel disc for dents, distortion and cracks. A disc in badly damaged condition must be replaced.
-
Check wheel hub nuts for tightness and, as necessary, retighten to specification.
Tightening Torque (a): 95 Nm (9.5 kg-m, 69.0 ft. lbs.)
-
Check wheel bearings for wear. When measuring thrust play, apply a dial gauge to axle shaft center after removing wheel center cap from wheel.
Thrust play limit:
Rear 0.8 mm (0.03 inch)
When measurement exceeds limit, replace bearing.
-
By rotating wheel actually, check wheel bearing for noise and smooth rotation. If it is defective, replace bearing.