suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Fluid - A/T|Capacity Specifications|Page 2087 > < Fluid - A/T|Capacity Specifications|Page 2085
Page 2
background image

LEVEL CHECK AT ROOM TEMPERATURE
The fluid level check at room temperature performed after repair or fluid change before test driving is just preparation for level check of normal
operating temperature. The checking procedure itself is the same as that described previously. If the fluid level is between FULL COLD and LOW
COLD, proceed to test drive. And when the fluid temperature has reached the normal operating temperature, check fluid level again and adjust it as
necessary.

FLUID CHANGE  

1. Lift up vehicle.

2. With engine is cool, remove drain plug from oil pan and drain A/T fluid.
3. Install drain plug.

Tightening Torque
(a): 23 Nm (2.3 kg.m, 17.0 ft. lbs.) 

Fluid - A/T|Capacity Specifications|Page 2087 > < Fluid - A/T|Capacity Specifications|Page 2085