Grand Vitara LTD 2WD V6-2.5L (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Type 1
PRECAUTION
When connector is connected to ABS actuator assembly, do not disconnect connectors of sensors and turn ignition switch ON position. Then DTC
will be set in EBCM.
ABS ACTUATOR ASSEMBLY
CAUTION: Never disassemble ABS actuator assembly, loosen blind plug or remove motor. Performing any of these prohibited services will affect
original performance of ABS actuator assembly.
INSPECTION
Check ABS actuator assembly for fluid leakage. If any, replace it.
REMOVAL
1. Disconnect negative (-) cable from battery.
2. Using special tool, disconnect brake pipes (2) from ABS actuator assembly (1).
Special tool
(A): 09950-78220
NOTE: Put bleeder plug cap onto pipe to prevent fluid from spilling. Do not allow brake fluid to get on painted surfaces.