Grand Vitara LTD 2WD V6-2.5L (2001)
BLEEDING
NOTE: The automated bleed procedure may be terminated by pressing the EXIT button on the SUZUKI scan tool.
1. Turn ignition switch to ON position.
2. Make sure that all bleeder plugs are closed. If use pressure bleeding tool, install it and set its pressure at 2.4 kg/cm2 (35 psi).
3. Select "Auto Bleed" under "Misc. Tests" on SUZUKI scan tool and press "ENTER".
4. The first part of automated bleed procedure will cycle pump motor and front release valves for 1 minute (i).