Grand Vitara LTD 2WD V6-2.5L (2001)
3.
Apply sealant "B": Suzuki Bond 1 207B (# 99104-31140) to the mating surfaces of the cylinder heads and cylinder block as shown.
4.
Use a plastic scraper as a jig to force the sealer into the air gap formed by the cylinder head, block and head gasket as shown in call-out "A"
below. There are four areas "B" where this must be performed.
NOTE:
Failure to perform this step will result in oil leaks that will migrate down the front side of the engine block. This may appear and be
misdiagnosed as a crankshaft oil seal leak.