Grand Vitara LTD 2WD V6-2.5L (2001)
![background image](/suzuki/grand_vitara_ltd_2wd/v6-2.5l/Page-1122002.png)
(C) : 09900-06107
7. Remove clutch coil lead wire clamp screw.
8. Remove clutch pulley with puller (1) from compressor (2).
NOTE: Be careful not to damage pulley when tapping magnet clutch.
9. Remove clutch coil.
INSTALLATION
1. Install clutch coil (2).
NOTE: Protrusion on under side of clutch coil must match hole in compressor (3) to prevent movement ant correctly locate lead wire.
2. Using special tool (C), install snap ring (1) as shown in the figure.
Special tool
(C) : 09990-06107
3. Clamp covering portion of lead wire.