Grand Vitara LTD 2WD V6-2.5L (2001)
Reverse removal sequence to install condenser dryer, according to instruction manual with supply parts.
NOTE:
-
When replacing condenser dryer, add 40 cc of refrigerating oil the same as compressor oil.
-
Do not remove the dryer from the plastic bag until just before inserting it into the receiver.
-
Install the condenser dryer (1) with its double-layer portion facing the bottom of the receiver.
-
If condenser dryer cap installing is bolt type, tighten specified torque for its bolt.
Tightening torque
Cap: 12.5 N.m (1.25 kg-m, 9 lb-ft)