Grand Vitara LTD 2WD V6-2.5L (2001)
10. Install brake disc and caliper assembly.
Tightening torque
Front brake caliper bolt (a): 85 Nm (8.5 kg-m, 61.5 ft. lbs.)
11. Apply sealant and install axle shaft drive flange or hub cap.
-
For 4WD vehicle
Apply sealant "A" mating surface of axle shaft drive flange, then install axle shaft drive flange and tighten flange bolt to specified torque.
Tightening torque
Axle shaft drive flange bolt (a): 50 Nm (5.0 kg-m, 36.5 ft. lbs.)
"A": Sealant 99000-31090
-
For 2WD vehicle
Remove grease, old sealant and dusts from mating surfaces of hub cap and hub to clean, apply water tight sealant "A" to cap mating surface
evenly, and install cap to hub.
"A": Sealant 99000-31090