Grand Vitara LTD JLX 4WD V6-2.5L (2000)
Measure cylinder head bore and adjuster outside diameter to determine cylinder head-to-adjuster clearance. If clearance exceeds limit, replace adjuster
or cylinder head.
INSTALLATION
1. Before installing valve lash adjuster to cylinder head, fill oil passage of cylinder head with engine oil according to following procedure.
Pour engine oil through oil holes and check that oil comes out from oil holes in sliding part of valve lash adjuster.
Perform this check on both intake and exhaust sides.
2. Valve lash adjuster to cylinder head.
Apply engine oil around valve lash adjuster and then install it to cylinder head.