Kizashi AWD L4-2.4L (2010)
Keyless Start Antenna: Testing and Inspection
Antenna Inspection
Antenna Inspection
Using SUZUKI scan tool
1. Connect SUZUKI scan tool to DLC with ignition mode of keyless push start system in "OFF".
2. Push engine switch to change ignition mode to "ON", and select "Active Test" mode on SUZUKI scan tool.
3. Check that each antenna operates.
If check result is not as specified, check applicable circuit for open or short.
Not using SUZUKI scan tool
Refer to the following table, check the function by exchanging each antenna.
If check result is not as specified, check applicable circuit for open or short.
