Kizashi AWD L4-2.4L (2010)
Structural Brace: Service and Repair
Rear Floor Side Brace Removal And Installation
Removal
1. Remove trunk side trim.
2. Remove rear floor side brace bolts (2) and remove rear floor side brace (1).
Installation
Reverse removal procedure noting the following point.
-
Tighten rear floor side brace bolts to specified torque.
Tightening torque
Rear floor side brace bolt: 30 N.m (3.1 kg-m, 22.5 lbf-ft)
