Kizashi AWD L4-2.4L (2010)
31. Make sure that a rubber box liner sheet is enclosed in the new instrument panel center lower box (replacement part).
32. Position the new instrument panel center lower box (replacement part), for installation and connect the socket connector(s).
33. While pulling outward on the floor panels, align the two claws with the positioning holes.
34. Continue assembling the vehicle in the reverse order that it was taken apart.
35. After the console parts are assembled, reconnect the battery, then set the clock and audio systems as they were prior to the repair. Test the operation
of the accessory socket using the customers accessory (if available) or any readily available 12V device, USB socket (if equipped) can be tested
using a standard USB MP3 device or Thumb drive loaded with MP3 files, and the HVAC controls.
36. Apply the proper campaign label to the upper radiator support in an area where it will be easily seen and identified, and record your Dealer Code in
the white portion of the label.
Disclaimer