Kizashi AWD L4-2.4L (2010)
Keyless Start Control Module: Service and Repair
Precautions For Replacing Keyless Start Control Module
Precautions for Replacing Keyless Start Control Module
-
When replacing the keyless start control module, replace it with a new one.
-
After keyless start control module is replaced with new one, perform "Immobilizer Key Registration" using SUZUKI scan tool.
-
When keyless start control module and ECM are replaced at the same time, refer to Procedure after ECM Replacement for their registration.
-
All of remote controllers must be ready for the registration.