Kizashi AWD L4-2.4L (2010)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Removal and Installation
Brake Pedal Assembly Removal and Installation
CAUTION:
Do not loosen nut of cylinder push rod clevis.
Removal
1) Remove steering column.
2) Remove Remove instrument panel.
3) Disconnect brake light switch connector.
4) Remove battery.
5) For M/T model, disconnect clutch master cylinder.
6) For CVT model, remove brake pedal bracket nut (1) located in engine compartment.
7) Remove clip (2) and clevis pin (3) from cylinder push rod clevis (1).
