Kizashi AWD L4-2.4L (2010)
Installation
Reverse removal procedure noting the following points.
^
Apply grease to inside of clevis hole in brake pedal (1), cylindrical side face of both pedal bushings (2), and brake pedal spring (3).
"A": Grease 99000-25050 (SUZUKI Super Grease E)
^
Tighten pedal shaft nut (4) to specified torque.
Tightening torque
Pedal shaft nut (a): 23 Nm (2.3 kg-m, 17.0 lbf-ft)
^
Insert clevis pin into holes in the clevis and brake pedal from right side.
^
Check brake pedal free height and brake pedal play.
-
Brake pedal free height:
-
Brake pedal play:
^
Adjust installation position of brake light switch.