Kizashi AWD L4-2.4L (2010)
10) Remove rear brake caliper from rear brake caliper carrier.
11) Remove rear brake pad.
12) Remove rear brake caliper carrier from rear suspension knuckle.
Installation
Reference: Rear Brake Caliper Inspection
CAUTION:
Do not twist rear brake flexible hose when installing rear brake caliper.
1) Install rear brake caliper carrier to rear suspension knuckle and tighten rear brake caliper carrier bolts to specified torque.
Tightening torque
Rear brake caliper carrier bolt (a): 60 Nm (6.1 kg-m, 44.5 lbf-ft)