Kizashi AWD L4-2.4L (2010)
Reassembly
CAUTION:
^
Wash parts with specified brake fluid before assembling.
^
Do not use other brake fluid or volatile solvent.
Caliper
1) Perform the following procedures before installing brake piston to rear brake caliper.
a) Check entire periphery of brake piston and inside face of cylinder for rust, corrosion and any other damage. If any faulty is found, replace rear
brake caliper.
b) Apply brake fluid to new piston seal (1) and install into groove in cylinder of rear brake caliper without twisting.
Brake fluid
Refer to reservoir cap of brake master cylinder or owners manual.