Kizashi AWD L4-2.4L (2010)
5) Apply grease to new shaft cover (1) inner surface and install to rear brake caliper.
NOTE:
Use rubber grease of which viscosity varies very little even at -40 degrees C (-40 degrees F).
6) Install lever (2) and washer (3) and tighten parking nut (4) to specified torque.
Tightening torque
Parking nut (a): 27 Nm (2.8 kg-m, 20.0 lbf-ft)
7) Install return spring (5) and engage it with lever.