Kizashi AWD L4-2.4L (2010)
Installation
Reference: Front and Rear Wheel Speed Sensor Inspection
Reverse removal procedure, noting the following points.
^
Check detective area is not covered with iron powder.
^
Tighten rear wheel speed sensor bolt (1) and rear wheel speed sensor bracket bolt (2) to specified torque.
Tightening torque
Rear wheel speed sensor bolt (a): 11 Nm (110 kg-m, 8.5 lbf-ft)
Rear wheel speed sensor bracket bolt (b): 25 Nm (250 kg-m, 18.5 lbf-ft)
^
Confirm that there is no space between rear wheel speed sensor (3) and suspension knuckle (4).