Kizashi AWD L4-2.4L (2010)
c) Turn crankshaft clockwise 720 degrees twice and repeat Step a) and b).
NOTE:
^
Be sure to turn crankshaft 720 degrees. If it is turned only 360 degrees, the timing marks on CMP actuator and exhaust camshaft timing
sprockets will not meet matchmark on camshaft housing No.1.
^
After turning crankshaft 720 degrees, the painted links of the timing chain will not be aligned with the timing marks on the CMP actuator
and the exhaust timing sprocket, but this is normal.
14) Check valve clearance.
15) Install cylinder head cover.
