Kizashi AWD L4-2.4L (2010)
Camshaft Journal Clearance
1) Clean camshaft housings and camshaft journals.
2) Remove all tappets.
3) Install lower bearing half and camshafts to cylinder head.
4) Place plastic gauge with the same width as the camshaft journal parallel to the camshaft, avoiding the oil hole.
5) Install camshaft housing referring to steps 5) to 6) in "Installation" under Camshaft and Tappet Removal and Installation.
CAUTION:
Do not rotate camshaft while gauging plastic is installed.
6) Remove housings, and use scale (2) on plastic gauge envelope to measure plastic gauge (1) width at the widest point.
Camshaft journal clearance (intake side of camshaft housing No.1)
Standard: 0.020 - 0.072 mm (0.00078 - 0.00283 in.)
Limit: 0.10 mm (0.0039 in.)
Camshaft journal clearance (except intake side of camshaft housing No.1)