Kizashi AWD L4-2.4L (2010)
Valve Cover: Service and Repair
Cylinder Head Cover Removal and Installation
Cylinder Head Cover Removal and Installation
Reference: Cylinder Head Cover Components
Removal
1) Disconnect negative (-) cable at battery.
2) Remove engine cover.
3) Remove ignition coil assemblies from cylinder head cover.
4) Disconnect IMT valve connector (1) and IMT valve harness clamp (2).
5) Disconnect PCV valve hose (1) and breather hose (2).
6) Detach engine harness clamps.
7) Remove engine harness bracket (3).