Kizashi AWD L4-2.4L (2010)
Oil Pan: Service and Repair
Oil Pan and Oil Pump Strainer Removal and Installation
Oil Pan and Oil Pump Strainer Removal and Installation
Reference: Oil Pan and Oil Pump Strainer Components
Removal
1) Remove left and right side engine under covers.
2) Drain engine oil.
3) Remove exhaust pipe No.1.
4) For 4WD model, remove transfer.
5) Remove oil level gauge (1) and oil level gauge guide (2).
6) Remove transaxle bolts (1), then remove drive plate cover (2) for CVT model, or clutch housing lower plate (2) for M/T model.