Kizashi AWD L4-2.4L (2010)
6) Install oil pan according to the following procedure.
CAUTION:
Be sure to use new oil pan bolt No.2 (1) pre-coated with adhesive.
a) Fit oil pan to lower crank case.
b) Tighten oil pan bolts to 15 N.m (1.5 kgf-m, 11.0 lbf-ft) in numerical order ("1" - "17") evenly and gradually.
c) In the same manner as Step b), retighten them to 25 N.m (2.5 kgf-m, 18.5 lbf-ft).
Tightening torque
Oil pan bolt* (a): 15 Nm -> 25 Nm (1.5 kgf-m -> 2.5 kgf-m, 11.0 lbf-ft -> 18.5 lbf-ft)
