Kizashi AWD L4-2.4L (2010)
(A): 09915-77311
(B): 09915-78211
7) Start engine and warm engine up to normal operating temperature.
8) After warming up, raise engine speed to 4,000 rpm and measure oil pressure.
Oil pressure specification
More than 300 - 550 kPa (3.1 - 5.6 kgf/cm2, 43.5 - 79.8 psi) at 4,000 rpm.
9) After checking oil pressure, stop engine and remove special tools.
10) Apply thread lock cement to thread portion of oil pressure switch (1), and then tighten switch to specified torque.
"A": Thread lock cement 99000-32110 (Thread Lock Cement Super 1322)
Tightening torque
Oil pressure switch (a): 13 Nm (1.3 kg-m, 9.5 lbf-ft)