Kizashi AWD L4-2.4L (2010)
Installation
Reference: Timing Chain and Chain Tensioner Inspection
1) Turn camshaft position key slot (1) within specified range (30 - 90 degrees) (2) in counterclockwise direction from top as shown in figure.
2) Align timing mark (3) on CMP actuator with matchmark (4) on camshaft housing No.1.
3) Align timing mark (5) on exhaust camshaft timing sprocket with matchmark (4) on camshaft housing No.1.
4) Install key (6) to key slot (1) of crankshaft.
a) Align key slot of crankshaft timing sprocket (7) with key, and then Install crankshaft timing sprocket to crankshaft.