Kizashi AWD L4-2.4L (2010)
Timing Cover: Service and Repair
Timing Chain Cover Removal and Installation
Timing Chain Cover Removal and Installation
Reference: Timing Chain Cover Components
CAUTION:
^
Keep working table, tools and hands clean while overhauling.
^
Take special care when handling aluminum parts so as not to damage them.
^
Do not expose removed parts to dust. Always keep them clean.
Removal
1) Remove engine assembly from vehicle.
2) Remove crankshaft pulley bolt. To lock crankshaft pulley (1), use special tool as shown in the following figure.
CAUTION:
^
Use special tool to prevent unnecessary load on timing chain, sprockets and any other related parts.
^
Use specified bolts (2) to install special tool to crankshaft pulley. Bolt size: M8
Pitch: 1.25 mm (0.0492 in.)
Length: 25 mm (0.98 in.)
Strength: 7T
Special Tool
(A): 09917-68221
3) Remove crankshaft pulley (1).
Use special tools as shown in figure if it is hard to remove.
Special Tool
(A): 09944-36011
(B): 09926-58010