Kizashi AWD L4-2.4L (2010)
5) Apply sealant "A" as follows:
a) Fill sealant "A" to mating clearance of cylinder block and cylinder head.
b) Apply sealant "A" to mating surface of timing chain cover as specified.
NOTE:
^
Before applying sealant, make sure mating surfaces are clean and dry.
^
Install timing chain cover within 2 minutes after applying sealant.
^
Wipe off excessive sealant of upper and lower end of the cover.
"A": Sealant 99000-31260 (SUZUKI Bond No.1217G)
Sealant bead size for timing chain cover
Width "a": 3 mm (0.11 in.)
