Kizashi AWD L4-2.4L (2010)
16. Discard the original upper bolt that secured the tensioner body, and install the new hexagon head bolt with washer (countermeasure parts).
17. Install the tensioner body (1) to the cylinder block and tighten the lower side bolt (2) of tensioner body lightly.
18. Install the NEW hexagon bolt (3) and washer (countermeasure parts) at the upper side of the tensioner body.
19. Using the hexagon bit socket and torque wrench, tighten upper side bolt (3) of tensioner body to specified torque.
20. Tighten lower side bolt (2) of tensioner body to specified torque.
21. Install tensioner pulley (1), pulley shield (2) and tensioner pulley bolt (3).
Note:
Off-centering of the pulley shield hinders tightening of pulley bolt. Tighten pulley bolt while centering pulley shield.