Kizashi AWD L4-2.4L (2010)
Fuel Injector: Testing and Inspection
Fuel Injector Inspection
Fuel Injector Inspection
WARNING: Put injector and battery as far away as possible to reduce risk of fire and personal injury when connecting/disconnecting test
harness to/from battery.
1. Remove fuel injector (5).
2. Set special tools to injector as follows.
Special Tool
(A): 09912-58421
(B): 09912-57610
(C): 09930-86310
(D): 09919-45710
a. Fit washer (1) (inside diameter 13.5 - 14.5 mm (0.531 - 0.570 in.)) to injector (2), and then install injector to special tool (A).
b. Connect special tool (C) to injector.
c. Install special tool (B) and special tool (D) to special tool (A).
d. Connect fuel feed pipe to special tool (D).
3. Install suitable vinyl tube (1) onto injector nozzle to prevent spout of fuel when performing test.
4. Put graduated cylinder (2) under injector.