Kizashi AWD L4-2.4L (2010)
4. Check the following points:
If check results are not satisfactory, replace throttle body assembly.
-
Wire harness and connections
-
APP sensor: See: Accelerator Pedal Position Sensor/Testing and Inspection/APP Sensor Inspection
-
TP sensor
-
Throttle motor
Throttle Motor Check
1. Disconnect connector from electric throttle body assembly with ignition mode of keyless push start system in "OFF".
2. Measure resistance between terminals "1" and "2" of throttle body assembly.
If faulty condition is found, replace electric throttle body assembly.
Throttle motor resistance
0.3 - 100 Ohms at 20 °C (68 °F)