Kizashi AWD L4-2.4L (2010)
Camshaft Position Sensor: Service and Repair
CMP Sensor Removal And Installation
Removal
1. Disconnect negative cable from battery.
2. Remove engine cover.
3. Disconnect connector from CMP sensor.
4. Remove CMP sensor from cylinder head.
Installation
Reverse removal procedure, noting the following points:
-
Apply engine oil to O-ring of CMP sensor (1).
-
Tighten CMP sensor bolt (2) to specified torque.
Tightening torque
CMP sensor bolt (a): 11 N.m (1.1 kg-m, 8.5 lbf-ft)