Kizashi AWD L4-2.4L (2010)
15. One minute later you will be instructed to turn the ignition back to the "ON" position. Be sure to confirm that the ignition is in fact on, then click the
"Next" button.
16. The final screen is now displayed indicating that the programming was successful, and also the summary of the new TCM parameters. Click
"Finish"
17. Using the SDT scan tool, once again check for DTC's that may have triggered during the reflash process. Compare the findings with the codes you
recorded in Step 2 before starting the process, and to the chart of "expected" DTC's. Diagnose all codes not related to the programming and not in
the chart.
18. Apply the proper campaign label to the upper radiator support in an area where it will be easily seen and identified, and record your Dealer Code in
the white portion of the label.
Disclaimer
