Kizashi AWD L4-2.4L (2010)
Keyless Start Control Module: Testing and Inspection
Keyless Start Control Module Registration
After keyless start control module is replaced with new one, register remote controller ID code in keyless start control module using SUZUKI scan tool
and immobilizer cable.
1. Prepare all of remote controllers ready for registration.
2. Perform "Immobilizer Key Registration" in "Immobilizer" menu indicated on SUZUKI scan tool. Refer to "SUZUKI SDT Immobilizer Control
System Operator's Manual".
NOTE: When ECM and keyless start control module are replaced with new ones at the same time, perform "Immobilizer Key Registration" instead of
"ECM Registration" using SUZUKI scan tool and immobilizer cable. Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the
immobilizer registration.
