Kizashi AWD L4-2.4L (2010)
Keyless Start Transmitter: Testing and Inspection
Remote Controller Registration
NOTE: Refer to "SUZUKI SDT Immobilizer Control System Operator's Manual" for the procedure of immobilizer registration.
-
Register remote controller ID code using "Immobilizer Key Registration" function in SUZUKI scan tool.
-
Remote controller registration is performed through "Immobilizer Key Registration", and this registers the immobilizer transponder code.
-
Performing "Immobilizer Key Registration", clears all of the ID codes already registered. Replace all of the remote controllers.
-
It is possible to register 4 remote controllers in keyless start control module.
-
If the keyless start control module is replaced, replace all of the remote controllers.
-
If all of the remote controllers are lost, register remote controllers after replacing keyless start control module.