Kizashi AWD L4-2.4L (2010)
11) Install P/S control module cover.
12) Install floor carpet.
13) Install glove box, center console box, side sill inner front scuff and dash side trim.
14) Install front seat.
15) Install steering lower shaft to steering gear case assembly.
16) Inspect toe.
17) Tighten tie-rod end lock nut to specified torque after confirming toe is specified value.
Tightening torque
Tie-rod end lock nut (a): 55 Nm (5.6 kg-m, 40.5 lbf-ft)