Kizashi AWD L4-2.4L (2010)
Installation
CAUTION:
Step 1) and 2) are prerequisite for installation of steering wheel. If steering wheel has been installed without these steps, contact coil cable
assembly will break when steering wheel is turned.
1) Conduct centering of contact coil cable assembly.
2) Align steering shaft with matchmark (1) of steering shaft and steering wheel and install steering wheel.
3) Tighten steering wheel nut to specified torque.
Tightening torque
Steering wheel nut (a): 33 Nm (3.4 kg-m, 24.5 lbf-ft)