Kizashi AWD L4-2.4L (2010)
5) Tighten drive shaft nut to specified torque.
6) Install front brake caliper and front brake rotor.
7) Install front wheel and tighten wheel nuts to specified torque.
8) Lower hoist and bounce vehicle body up and down several times to stabilize suspension and then tighten suspension arm bolts and suspension arm
nut in this sequence to specified torques.
Tightening torque
Suspension arm bolt (a): 93 Nm (9.5 kg-m, 68.5 lbf-ft)
Suspension arm nut (b): 93 Nm (9.5 kg-m, 68.5 lbf-ft)