Kizashi AWD L4-2.4L (2010)
Upper Arm Removal and Installation
Upper Arm and Bushing Disassembly and Reassembly
Disassembly
1) Push out upper arm bushing (2) using special tool and hydraulic press (1).
Special Tool
(A): 09913-80113 (Bearing installer)
(B): 09913-70210 (Bearing installer set)
Reassembly
Reverse disassembly procedure, noting the following points.
^
Use special tool and hydraulic press (1) to press fit upper arm bushing (2).
^
Bushing should be directed as shown below and both ends of bushing collar (4) projecting from control rod should be the same in amount.
CAUTION: