Kizashi AWD L4-2.4L (2010)
Seals and Gaskets: Service and Repair
Differential Side Oil Seal Replacement
Differential Side Oil Seal Replacement
1) Hoist vehicle and drain CVT fluid.
2) Remove drive shaft joints from differential gear of transaxle. Refer to Front Drive Shaft Assembly Removal and Installation:Front for procedure to
disconnect drive shaft joints.
NOTE:
For differential side oil seal removal, it is not necessary to remove drive shafts from steering knuckle.
3) Remove differential side oil seal (1) using special tool.
Special Tool
(A): 09913-50121
CAUTION:
When removing oil seal, be careful not to scratch the oil seal press-fit part of transaxle housing. Otherwise, CVT fluid may cause
leakage.