Kizashi AWD L4-2.4L (2010)
Rear Drive Shaft Assembly Removal and Installation
Rear Drive Shaft Assembly Removal and Installation
Reference: Rear Drive Shaft Components: Rear
Reference: Rear Drive Shaft Assembly On-Vehicle Inspection: Rear
Removal
1) Hoist vehicle and remove rear wheel.
2) Release caulking from drive shaft nut (1) and remove drive shaft nut with brake pedal depressed.
CAUTION:
Insufficient release of caulking may cause damage to the drive shaft thread.
NOTE:
Carefully use a sharp-tipped bit to release the caulking.