Kizashi AWD L4-2.4L (2010)
Reassembly
Judging from abnormality noted before disassembly and what is found through visual check of component parts after disassembly, prepare replacing
parts and proceed to reassembly.
Make sure that wheel side joint assembly (1) and housing of tripod joint (2) are washed thoroughly and air dried.
CAUTION:
^
To prevent any problem caused by washing solution, do not wash tripod joint except its housing. It is acceptable to use a shop cloth to
degrease tripod joint.
Degreasing of tripod joint with shop cloth is allowed.
^
Do not wash boots in degreaser such as gasoline or kerosene, etc. Washing in degreaser causes boot deterioration.
^
To ensure full performance of joint as originally designed, apply the specified amount of grease to respective joint according to the
following procedures.